I. Notes on the establishment of roller guide shoes.
1, check the establishment of the aide rail, for example, the joint at the progression deviation and measure deviation doesn’t meet the prerequisites ought to be changed first.
2, check whether the hole of the security clasp is in accordance with the standard prerequisites, the hole between the different sides of the wedge block will not be under 2-3mm.
3, the security pincers and roller guide shoes of the jaws should be fixated on the arrangement, the top surface of the two finishes of the mouth and the top surface of the aide rail freedom will not be under 5 mm.
4, the aide shoe roller ought to be kept vertical with the aide surface, the center roller ought to be lined up with the top surface of the aide.
5, the most extreme strain of the roller guide shoe will not surpass 25Kg, and the tension on every roller will not surpass 12.5Kg, assuming the roller pressure is too enormous to possibly be changed, the static and dynamic equilibrium of the vehicle box will be re-adjusted.
- After the establishment is finished, the aide rail should be china Track Roller Factory painstakingly cleaned of oil and the outer layer of the aide rail should be liberated from oil and soil.
II. Establishment graph.
The leeway between the tight clamp of the roller guide shoe should be lined up with the middle, the freedom between the top surface of the aide rail and the tight clamp should not be under 5mm, the tight clamp of the roller and the security cinch ought to be adjusted, and the leeway between the different sides of the wellbeing clip should not be under 2-3mm.
Japanese roller guide shoe
The three tensioning springs A will not be totally squeezed, the tensioning power will not be more prominent than 12.5Kg, and the springs will be locked after the change is finished.
The leeway between the three roller situating screws B and the roller interfacing arm b ought to be something like 2MM, for the lower guide shoe freedom ought to rely upon the wellbeing clasp freedom, the leeway ought to be more modest than the security cinch leeway. (Expanded perspective on the circle position in the graph is appended)
The upper aide shoe watch C should be fixed set up after establishment is finished. The lower boot isn’t provided.
1 Notes on roller guide shoe establishment
1, check the establishment of the aide rail, for example, the joint at the progression deviation and measure deviation doesn’t meet the prerequisites ought to be changed first.
2, check whether the hole of the wellbeing clip fulfills the guideline prerequisites, the hole between the different sides of the wedge block will not be under 2-3mm.
3, the wellbeing pincers and roller guide shoes of the jaws should be focused on the arrangement, the top surface of the two closures of the mouth and the top surface of the aide rail leeway will not be under 5 mm.
4, the aide shoe roller ought to be kept vertical with the aide surface, the center roller ought to be lined up with the top surface of the aide.
5, the most extreme tension of the roller guide shoe will not surpass 25Kg, and the strain on every roller will not surpass 12.5Kg, in the event that the roller pressure is too enormous to be in any way changed, the static and dynamic equilibrium of the vehicle box will be re-adjusted.
6、After the establishment is finished, the rail should be painstakingly cleaned of oil and the outer layer of the rail should be liberated from oil.
2 Installation graph
The leeway between the tight clamp of the roller guide shoe should be lined up with the middle, the freedom between the top surface of the aide rail and the tight clamp should not be under 5mm, the tight clamp of the roller and the security clip ought to be adjusted, and the freedom between the different sides of the wellbeing cinch should not be under 2-3mm.
Japanese roller guide
The three tensioning springs A will not be totally squeezed, the tensioning power will not be more noteworthy than 12.5Kg, and the springs will be locked after the change is finished.
The leeway between the three roller situating screws B and the roller associating arm b ought to be something like 2MM, for the lower guide shoe freedom ought to rely upon the wellbeing clasp freedom, the freedom ought to be more modest than the security cinch freedom. (Augmented perspective on the circle position in the chart is appended)