Packline Vacuum Lifters

There are 7 models available for use with non-porous materials such as glass, with vacuum levels up to 27″ Hg with vacuum flows up to 15.8 SCFM . Gen4 Ionizing Bars are ideal for relatively flat materials, where the bar can be mounted close to the product surface. EXAIR’s EFC™ is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blow off, drying, cooling, conveying and static elimination operations.

These stones can have a fairly smooth surface, but if you look closely you will see the pockets of air. These pockets throughout the product will let air and water flow through the stone making them a porous concrete product. Once again, an extremely important note to make when considering a vacuum lift system for you. Most dry cast products are pavers and retaining wall systems, but you will definitely find steps and slabs made as dry cast.

The Cold Gun Aircoolant System™ produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. It eliminates the costs associated with the purchase and disposal of cutting fluids and worker related health problems from breathing airborne coolants or slipping on wet floors. NEMA 4 Cabinet Coolers (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve for both the vortex tube and cabinet air exhaust. This valve closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4 Cabinet Coolers are available in many cooling capacities for large and small control panels.

The Universal Air Knife Mounting System can be articulated into any position and provides a maximum extension of 30″ . A 1/2″ diameter through hole or a 1/2″-13 tapped hole is required for mounting. The Full-Flow Air Knife borrows engineering elements from our original standard air knife with the added benefit of an airflow across its entire length. They also provide the smallest footprint of our air knife line when mounting space is tight and cramped. These are a low cost choice and are available from stock 3” to 36” long and made from aluminum or 303SS.

The latest product in the Elephant vacuum lifter range is the variant designed for moving sandwich panels and insulated panels with weights up to 400 kg for standard models. The Elephant wood vacuum lifters are used to easily lift and move breathable panels, non-breathable panels, doors, tiles, beams and planks . Vacuum lifters can pick up products ranging in size and shape helping to improve worker safety and efficiency. Vacuum lifters are often used to lift bags, boxes, plates, products, barrels, stackers, pallets and reels. We design various models of vacuum lifters for the wood sector.

vacuum lifting device

Their goal is to make your work physically easier – focusing on efficiency, ergonomics and safety. We are using our knowledge, experience and positive attitude to make it easier for you – before, during and after your purchase. We have developed many different methods of employing vacuum lifting, enabling vacuum lifting systems to be used in the most demanding environments. We are passionate about our customer gaining the maximum benefit from our lifting equipment and have developed a number of supporting structures that increase coverage and utilisation of our systems. With minimal dust traps the vacuum lifting unit is very easy to clean. Available in stainless steel, these suction lifters are ideal for the food industries.

It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids. EXAIR’s Side Mount Kits make mounting on the side of an electrical enclosure possible when there is limited space on the top or side. (NEMA 4 and 4X Cabinet Cooler Systems must be mounted vertically.) The Side Mount Kits maintain the NEMA rating of large and small NEMA Type 12, 4 and 4X enclosures. Side Mount Kits for NEMA 12 Cabinet Cooler Systems have an aluminum construction. Those for NEMA 4 and 4X Cabinet Cooler Systems are Type 303 or Type 316 stainless steel.

I have used and seen their equipment in action and would stand behind their products. If you so feel inclined, click on the link for each of these products and get in touch with M-Quip to purchase. They are a family operation out of Burlington, Ontario and have been established since 2014.